Collection
There is always a suitable product for you with a wide variety of product types
WE600 is a specialty alloy steel welding electrode associated with repair welding and dissimilar-metal applications. It is considered for selected difficult-to-weld steels and industrial components. Confirm the original product identity, technical data sheet (TDS), and compatibility with the base metal before use.
E71T-1M/9M is a gas-shielded flux cored welding wire classified under AWS A5.20 for suitable carbon steel and low-alloy steel applications. Its dual classification meets applicable E71T-1M and E71T-9M requirements, making it a candidate for specification-driven structural steel fabrication and industrial welding.
E307T1-1 stainless steel flux cored welding wire is an AWS A5.22-classified consumable for gas-shielded flux-cored arc welding. Its high-manganese austenitic weld metal is designed for selected difficult-to-weld materials, dissimilar-metal joints and applications requiring good resistance to weld cracking.
E308L-17 stainless steel welding electrode is a low-carbon Cr-Ni covered electrode classified under AWS A5.4. Its Type 17 coating is designed for smooth arc operation, attractive weld bead formation and easy slag removal. It is commonly used for suitable 304 and 304L stainless steel fabrication. GD WELD can provide product specifications and quotation information according to your required sizes and order quantity.
E312-16 is a high-alloy stainless steel covered electrode classified under AWS A5.4. Its chromium-rich weld metal, typically around 29% Cr and 9–10% Ni, offers good resistance to weld cracking in challenging applications. It is commonly selected for dissimilar-metal joints, difficult-to-weld steels, tool steel repairs and buffer layers before hardfacing. Confirm suitability against the base materials and qualified welding procedure.
ER347 stainless steel welding wire is a niobium-stabilized filler metal for joining suitable austenitic stainless steels. It is commonly selected for Type 347 stainless steel and certain Type 321 applications where resistance to intergranular corrosion is an important consideration. Contact GD WELD for available sizes, technical specifications and export quotations.
E316LT1-1/-4 stainless steel flux cored welding wire is designed for gas-shielded FCAW of 316L-type stainless steels. Its chromium-nickel-molybdenum weld metal supports applications requiring resistance to pitting and general corrosion. Suitable for selected chemical, process and stainless steel fabrication projects, subject to material compatibility and welding procedures.
E309LT1-1/-4 stainless steel flux cored welding wire is designed for gas-shielded FCAW of dissimilar metals and stainless steel fabrication. It is commonly used for joining stainless steel to carbon or low-alloy steel, as well as selected cladding and transition-layer applications. Contact GD WELD for available sizes, technical data and quotations.
E308LT1-1C stainless steel flux cored welding wire is designed for gas-shielded FCAW of compatible 304 and 304L stainless steels. Using CO₂ shielding gas and DCEP polarity, it supports efficient welding in industrial fabrication. The supplied test report records 0.026% carbon, 611 MPa tensile strength and 42% elongation. Suitable for stainless steel tanks, piping, food processing equipment and general fabrication, subject to application requirements.
E308L-16 is a low-carbon stainless steel stick electrode classified under AWS A5.4 for shielded metal arc welding (SMAW). It is primarily used for welding 304L and compatible 18Cr-8Ni austenitic stainless steels. Its low-carbon weld metal helps reduce chromium carbide precipitation, supporting intergranular corrosion resistance when the welding procedure and service conditions are suitable.
R31 TIG welding wire is used for welding specified low-alloy heat-resistant steels, including 12Cr1MoV when supported by the applicable welding procedure. It is intended for applications such as boiler piping and power-generation equipment where weld-metal properties and service conditions must be carefully controlled. GD WELD can help buyers confirm the applicable standard, available diameter, chemical composition and technical documentation before ordering.
ER308H is a higher-carbon austenitic stainless steel filler metal used for specified welding applications involving 304H stainless steel. Its controlled carbon content of 0.04%–0.08% distinguishes it from low-carbon ER308L and makes it relevant to welding procedures designed for elevated-temperature service.
ER308LSi is a low-carbon austenitic stainless steel filler metal with higher silicon content than ER308L. It offers improved weld-pool wetting and bead formation for suitable stainless steel welding applications. GD WELD supplies ER308LSi as MIG solid wire and TIG filler rods, subject to availability and technical specifications.
E309L-16 is a low-carbon stainless steel welding electrode with a nominal 23% Cr–12% Ni weld-metal composition. It is commonly used for joining stainless steel to carbon steel and suitable low-alloy steel, as well as specified 309L-type welding and cladding applications.
E12018-G is a 120 ksi high-strength low-hydrogen welding electrode for SMAW. It is designed for demanding high-strength and low-alloy steels where higher weld-metal strength is required. As a G-type AWS classification, E12018-G does not define one universal weld-metal chemistry. Actual composition, toughness and performance should be confirmed from the product TDS and MTC.
Recommended articles
Buying guides, material notes, and stories for choosing with more confidence.
E6011 or E6010 for pipe welding? Compare AC/DC compatibility, root pass applications, and welding procedure requirements before choosing an electrode.
ER1070 or ER1100 aluminum welding wire? Compare aluminum purity, applications and base-metal compatibility to select the right filler.
ER410 or ER420 welding wire? Learn the key differences in hardness, applications and heat treatment to select the right martensitic stainless steel filler.
