444
Metal & Flux Cored Wire

E81T1-B2 Flux Cored Welding Wire

E81T1-B2 is a low-alloy Cr-Mo flux cored welding wire for all-position FCAW of 1.25Cr-0.5Mo steels. Under AWS A5.29, it is commonly classified as E81T1-B2C or E81T1-B2M, depending on the shielding gas. It is designed for P11/P12 welding, Cr-Mo pipe fabrication, boilers, pressure vessels and petrochemical equipment requiring controlled welding and PWHT.

E81T1-B2 Cr-Mo Flux Cored Welding Wire

E81T1-B2 is a gas-shielded FCAW wire for welding 1.25Cr-0.5Mo low-alloy steel. It is commonly selected as a P11 Cr-Mo welding wire for pipe, pressure equipment and high-temperature service.
The continuous-wire process provides higher productivity than manual stick welding while maintaining a Cr-Mo weld-metal chemistry suitable for qualified industrial welding procedures.



E81T1-B2C vs E81T1-B2M

Both classifications belong to the E81T1-B2 family. The main difference is the shielding gas:
Classification
Shielding Gas
E81T1-B2C
100% CO₂
E81T1-B2M
Ar/CO₂ mixed gas
The exact shielding-gas composition and welding parameters should follow the manufacturer's technical data and qualified WPS.



Base Materials & Applications

E81T1-B2 is commonly used for:
  • ASTM A335 P11/P12 pipe
  • ASTM A387 Grade 11 Cr-Mo steel
  • ASTM A213 T11/T12 tubing
  • 1.25Cr-0.5Mo steel components
  • Cr-Mo process piping
  • Boiler and steam piping
  • Pressure vessels
  • Heat exchangers
  • Power-generation equipment
  • Petrochemical and oil & gas equipment
For P11 steel welding, preheat, interpass temperature and PWHT should be established according to the applicable code and qualified welding procedure.



International Classification

  • AWS A5.29: E81T1-B2C / E81T1-B2M
  • ASME SFA-5.29: E81T1-B2C / E81T1-B2M
  • Process: FCAW-G
  • Polarity: DC+



Typical Weld Metal Chemical Composition

The following values represent AWS classification/reference limits rather than a guaranteed GD WELD product analysis.
Element
AWS Reference (%)
C
0.05–0.12
Mn
≤1.25
Si
≤0.80
P
≤0.030
S
≤0.030
Cr
1.00–1.50
Mo
0.40–0.65
Actual weld-metal chemistry can vary according to shielding gas, manufacturer, welding procedure and production batch.



Mechanical Properties After PWHT

AWS Classification Requirements

Property
Requirement
Yield Strength
≥470 MPa
Tensile Strength
550–690 MPa
Elongation
≥19%
Commercial products may show higher typical values depending on shielding gas and PWHT condition. Actual mechanical properties should be confirmed by the manufacturer's test certificate.



Typical FCAW Welding Parameters

Welding parameters vary with wire diameter, shielding gas, welding position and manufacturer.
For 1.2 mm wire, a typical commercial range with Ar/CO₂ shielding gas is approximately:
  • Current: 160–260 A
  • Voltage: 24–30 V
  • Polarity: DC+
  • Shielding Gas: Ar/CO₂ mixed gas
With 100% CO₂, voltage and other parameters may require adjustment according to the manufacturer's datasheet.



Supply from GD WELD

GD WELD supplies E81T1-B2 flux cored welding wire for P11/P12 Cr-Mo piping, pressure equipment, power generation and petrochemical applications.
For quotation, specify:
  • E81T1-B2C or E81T1-B2M
  • Wire diameter
  • Shielding gas
  • Quantity
  • Base material
  • Applicable standard or project specification

Tags

E81T1-B2, E81T1-B2 flux cored welding wire, E81T1-B2C, E81T1-B2M, AWS E81T1-B2, Cr-Mo flux cored welding wire, Cr-Mo welding wire, P11 welding wire, P11 steel welding wire, P11 Cr-Mo welding wire, P12 welding wire, Cr-Mo pipe welding wire, FCAW Cr-Mo wire, 1.25Cr-0.5Mo welding wire

Continue browsing

More products from the catalog

Pair it with other pieces from the same collection or routine.

不锈钢药芯
Metal & Flux Cored Wire

E307LT1-1 Stainless Steel Flux Cored Welding Wire

E307T1-1 stainless steel flux cored welding wire is an AWS A5.22-classified consumable for gas-shielded flux-cored arc welding. Its high-manganese austenitic weld metal is designed for selected difficult-to-weld materials, dissimilar-metal joints and applications requiring good resistance to weld cracking.

View product
药芯焊丝
Metal & Flux Cored Wire

E81T5-B6C Cr-Mo Flux Cored Welding Wire

E81T5-B6C is a Cr-Mo low alloy steel flux cored welding wire classified under AWS A5.29/A5.29M in the supplied inspection report. The tested 1.2 mm wire uses CO₂ shielding gas and contains 5.2% chromium and 0.50% molybdenum. It is designed for specified Cr-Mo steel welding applications where the required classification and weld metal properties are confirmed. Check base metal compatibility, welding procedure and heat treatment requirements before use.

View product
不锈钢药芯
Metal & Flux Cored Wire

E410T1-1C Stainless Steel Flux Cored Welding Wire

E410T1-1C stainless steel flux cored welding wire is classified under AWS A5.22/A5.22M in the supplied test report. Available test data covers 1.2 mm wire, CO₂ shielding gas, chemical composition, and deposited metal mechanical properties for technical evaluation.

View product