Metal & Flux Cored Wire
E410T1-1C Stainless Steel Flux Cored Welding Wire
E410T1-1C stainless steel flux cored welding wire is classified under AWS A5.22/A5.22M in the supplied test report. Available test data covers 1.2 mm wire, CO₂ shielding gas, chemical composition, and deposited metal mechanical properties for technical evaluation.
According to the supplied inspection report, the product is identified under AWS A5.22/A5.22M, with a wire diameter of 1.2 mm and CO₂ shielding gas. The reported test results provide reference data for buyers evaluating E410T1-1C welding wire for industrial fabrication and maintenance.
For applications involving compatible 410-series stainless steel, buyers may also consider ER410 martensitic stainless steel solid welding wire. The choice between solid wire and flux cored wire depends on the welding process, base material, and qualified welding procedure.
Key Specifications
Item | Specification |
|---|---|
Product Name | E410T1-1C Stainless Steel Flux Cored Welding Wire |
Classification | E410T1-1C, as stated in the inspection report |
Standard | AWS A5.22/A5.22M, as stated in the report |
Product Type | Stainless Steel Flux Cored Welding Wire |
Stainless Steel Family | Martensitic |
Wire Diameter | 1.2 mm |
Shielding Gas | CO₂ |
Tensile Strength Requirement | ≥ 520 MPa |
Actual Tensile Strength | 617 MPa |
Elongation Requirement | ≥ 20% |
Actual Elongation | 32% |
Bend Test | OK, according to the report |
X-ray Test | Grade I, according to the report |
Note: Confirm the applicable standard edition and classification requirements before using these values for formal welding procedure qualification.
Chemical Composition of E410T1-1C
The following table presents the chemical composition limits and actual test results from the supplied inspection report. All values are expressed in weight percent (wt.%).
Element | Requirement (wt.%) | Actual Result (wt.%) |
|---|---|---|
Carbon (C) | ≤ 0.12 | 0.05 |
Silicon (Si) | ≤ 1.00 | 0.42 |
Manganese (Mn) | ≤ 1.20 | 0.38 |
Sulfur (S) | ≤ 0.03 | 0.006 |
Phosphorus (P) | ≤ 0.04 | 0.02 |
Nickel (Ni) | ≤ 0.60 | 0.04 |
Chromium (Cr) | 11.0–13.5 | 12.76 |
Molybdenum (Mo) | ≤ 0.75 | 0.01 |
Copper (Cu) | ≤ 0.75 | 0.007 |
The reported chromium content is 12.76%, within the stated 11.0–13.5% range. Actual chemical composition values represent the tested batch and may vary between production batches.
Note: Verify the stated limits against the applicable AWS classification and the manufacturer's approved technical documentation.
Mechanical Properties of Deposited Metal
Property | Requirement | Actual Result |
|---|---|---|
Tensile Strength | ≥ 520 MPa | 617 MPa |
Elongation | ≥ 20% | 32% |
Bend Test | OK | OK |
X-ray Test | Grade I | Grade I |
These results are taken from the supplied inspection report. Actual weld metal properties depend on testing conditions, welding parameters, and any applicable heat treatment.
Welding Parameters for E410T1-1C
The supplied inspection report lists the following welding conditions for 1.2 mm wire.
Parameter | Reported Value |
|---|---|
Wire Diameter | 1.2 mm |
Shielding Gas | CO₂ |
Welding Current | 140–240 A |
Welding Voltage | 22–23 V |
These values are reference conditions from the supplied report, not universal settings for every application. Follow the manufacturer's technical data and the qualified welding procedure for production welding.
Applications and Material Selection
E410T1-1C may be considered for compatible martensitic stainless steel welding applications where the specified weld metal properties and welding procedure requirements are satisfied.
Potential applications include:
- Fabrication of compatible chromium stainless steel components
- Industrial equipment maintenance and repair
- Welding of suitable 410-series stainless steel parts
- Industrial applications requiring specified weld metal strength and hardness
For components made from 13Cr-4Ni martensitic stainless steel or CA6NM, buyers may also review E410NiMoT1-1/-4 stainless steel flux cored welding wire. Its alloy composition and properties differ from E410T1-1C, so confirm material compatibility and welding procedure requirements before selecting a consumable.
Material compatibility is essential. Do not select welding wire solely because the base material has a similar chromium content. Confirm the exact base metal grade, service conditions, required hardness, and preheating or post-weld heat treatment requirements.
How to Choose E410T1-1C Flux Cored Welding Wire
When sourcing E410T1-1C stainless steel flux cored welding wire, buyers should verify:
- AWS classification: Confirm that the complete product designation matches the project specification.
- Wire diameter: Check whether 1.2 mm or another available diameter is required.
- Shielding gas: Confirm CO₂ compatibility with the specified classification and welding procedure.
- Chemical composition: Review the applicable limits and batch inspection data.
- Mechanical properties: Confirm tensile strength, elongation, hardness, and other project-specific requirements.
- Welding procedure: Verify preheating, post-weld heat treatment, and inspection requirements where applicable.
Do not assume E410T1-1C, E410T1-1, E410T1-4, and E410NiMo classifications are interchangeable. Confirm the full designation and applicable technical requirements before selecting an alternative.
Request a Quote for E410T1-1C Welding Wire
GD WELD supplies specialty welding consumables for industrial applications and overseas procurement.
To request a quotation for E410T1-1C stainless steel flux cored welding wire, please provide:
- Required AWS classification
- Wire diameter and order quantity
- Base material and welding application
- Applicable standard or project specification
- Required inspection documents or certificates
Contact GD WELD to confirm product availability, technical documentation, and supply options for your stainless steel flux cored welding wire requirements.
