Collection

Products

There is always a suitable product for you with a wide variety of product types

All products
122 products
1
Welding Wire

ER420 Stainless Steel Welding Wire | AWS A5.9 TIG & MIG Filler Metal

ER420 is a high-carbon 13% chromium martensitic stainless steel solid welding wire and hardfacing filler metal classified under AWS A5.9. With higher carbon content than ER410, it delivers superior weld-metal hardness and abrasion resistance, making it ideal for welding matching 420 stainless steel and repairing or surfacing wear-resistant components.

View product
实心焊丝
Welding Wire

ER309LMo Stainless Steel Welding Wire (S309LMo)

ER309LMo (S309LMo) is a molybdenum-alloyed chromium-nickel stainless steel welding wire. Its higher molybdenum content distinguishes it from conventional ER309L and makes it suitable for applications where a Mo-containing filler metal is specified. GD WELD offers ER309LMo welding wire in 0.8, 1.0, 1.2, 1.6, 2.0, 2.4 and 3.2 mm diameters. The supplied 1.2 mm material certificate reports 23.18% chromium, 13.86% nickel, 2.12% molybdenum and 620 MPa deposited weld metal tensile strength.

View product
不锈钢实心焊丝
Welding Wire

ER410NiMo / H05Cr12Ni4Mo Stainless Steel Welding Wire

ER410NiMo is a chromium-nickel-molybdenum stainless steel welding wire designation listed in AWS A5.9-2022. The supplied material certificate also identifies the product as H05Cr12Ni4Mo. GD WELD supplies this welding wire in a tested diameter of 1.2 mm. Its material certificate reports 12.27% chromium, 4.72% nickel, 0.49% molybdenum and a deposited weld metal tensile strength of 800 MPa.

View product
实心焊丝
General Welding Consumables

ER70S-6 Welding Wire – MIG Wire & TIG Filler Rod

ER70S-6 is a manganese-silicon deoxidized solid carbon steel filler metal classified under AWS A5.18. It is used for GMAW (MIG/MAG) and GTAW (TIG) welding of compatible carbon steel materials. GD WELD supplies MIG wire in 0.8–1.2 mm and TIG filler rods in 1.6–4.0 mm. Separate material certificates provide chemical analysis, deposited metal properties and -30°C impact test results.

View product
ER70S-3
General Welding Consumables

ER70S-3 Solid Welding Wire

ER70S-3 is a manganese-silicon deoxidized solid carbon steel welding wire classified under AWS A5.18. It is commonly used for general fabrication and welding of mild and low-alloy steels, offering stable weld-metal properties and good bead quality. The supplied material certificate reports 0.076% carbon, 0.94% manganese and 0.65% silicon. Deposited weld metal achieved 527 MPa tensile strength, 446 MPa yield strength and 25% elongation, with an average impact value of 111.7 J at -20°C.

View product
焊条无型号
Nickel & Special Alloys

ENiCrFe-3 Nickel Alloy Welding Electrode (Alloy 182)

ENiCrFe-3 is a nickel-chromium-iron covered electrode classified under AWS A5.11 and associated with Alloy 182 weld metal. It is designed for welding compatible nickel-based alloys and selected dissimilar-metal joints. Available in a tested diameter of 3.2 mm, this electrode has a deposited metal composition of 68.81% Ni, 15.88% Cr and 2.51% Nb. MTC test results show 610 MPa tensile strength, 440 MPa yield strength and 35% elongation.

View product
ERNiCrMo-10
Nickel & Special Alloys

ERNiCrMo-3 Nickel Alloy Welding Wire (Alloy 625)

ERNiCrMo-3 is a nickel-chromium-molybdenum-niobium welding filler metal classified under AWS A5.14 and associated with Alloy 625 (UNS N06625). Its combination of chromium, molybdenum and niobium provides a balance of strength and corrosion resistance for demanding industrial welding applications. This ERNiCrMo-3 nickel alloy welding wire is supplied in a tested diameter of 1.6 mm. The material test certificate reports 64.80% nickel, 21.14% chromium, 9.02% molybdenum and 3.77% niobium plus tanta

View product
ERNiCrMo-10
Nickel & Special Alloys

ERNiCrMo-10 Alloy C-22 Nickel Alloy Welding Wire

ERNiCrMo-10 is a nickel-chromium-molybdenum-tungsten welding filler metal classified under AWS A5.14 and associated with Alloy C-22 (UNS N06022). Its high chromium and molybdenum content helps resist pitting and crevice corrosion in demanding chemical environments. This ERNiCrMo-10 welding wire has a tested diameter of 1.2 mm. Its material test certificate reports 22.18% Cr, 13.10% Mo and 2.97% W, highlighting its high-alloy composition for corrosion-resistant welding applications.

View product
镍基焊丝_WH_800x800px
Cast Iron & Hardfacing

ERNi-CI

ERNi-CI is an AWS A5.15 pure nickel solid wire with nickel content ≥98% for cast iron welding. It delivers outstanding toughness and effectively inhibits car...

View product
钛焊丝_WH_800x800px
Nickel & Special Alloys

ERNiCrFe-5

ERNiCrFe-5 (SNi6062) is a Ni-Cr-Fe-Nb nickel-based solid wire with superior oxidation & chloride stress corrosion resistance and low hot cracking tendency. F...

View product
焊条 焊条 焊条
Welding Electrode

E347-16 Stainless Steel Welding Electrode

E347-16 is an austenitic stainless steel welding electrode classified under AWS A5.4. Its niobium-stabilized 19Cr-9Ni weld metal is designed for welding AISI 321 and 347 stainless steels, helping improve resistance to intergranular corrosion, particularly in elevated-temperature applications. This E347-16 welding electrode is commonly used in chemical processing equipment, pressure vessels, heat exchangers and stainless steel piping.

View product
ER110S-G
Low Alloy & High Strength

ER110S-G High Strength Solid Welding Wire

ER110S-G is a high-strength low-alloy solid welding wire classified under AWS A5.28. Its G designation allows manufacturer-specific chemical composition. Our 1.2 mm test sample achieved 840 MPa tensile strength, 740 MPa yield strength and an average impact value of 131.3 J at -40°C.

View product
E8018-B2
Heat Resistant & Cr-Mo

E8018-B2 Cr-Mo Welding Electrode

E8018-B2 is a low-hydrogen Cr-Mo welding electrode classified under AWS A5.5 for 1.25Cr-0.5Mo heat-resistant low-alloy steels. It is commonly selected for P11, P12, T11 and T12 materials used in boilers, steam piping, pressure vessels and petrochemical equipment. For P11/P12 applications requiring a low-hydrogen SMAW electrode, E8018-B2 provides a matching 1.25Cr-0.5Mo weld deposit for elevated-temperature service.

View product
E383-16
Welding Electrode

E383-16 Stainless Steel Welding Electrode

E383-16 is a high-alloy austenitic stainless steel welding electrode classified under AWS A5.4. Its Cr-Ni-Mo-Cu weld metal is designed for corrosion-resistant welding applications involving compatible high-alloy materials. The supplied test result shows 28.3% chromium, 31.3% nickel, 3.86% molybdenum and 1.18% copper. This alloy composition makes E383-16 product option for demanding chemical processing and corrosion-resistant fabrication, subject to base metal compatibility ,service requirement.

View product
不锈钢药芯
Metal & Flux Cored Wire

E307LT1-1 Stainless Steel Flux Cored Welding Wire

E307T1-1 stainless steel flux cored welding wire is an AWS A5.22-classified consumable for gas-shielded flux-cored arc welding. Its high-manganese austenitic weld metal is designed for selected difficult-to-weld materials, dissimilar-metal joints and applications requiring good resistance to weld cracking.

View product
Page 1 of 9

Recommended articles

Guides for choosing well

Buying guides, material notes, and stories for choosing with more confidence.