ERNiCrMo-10
Nickel & Special Alloys

ERNiCrMo-3 Nickel Alloy Welding Wire (Alloy 625)

ERNiCrMo-3 is a nickel-chromium-molybdenum-niobium welding filler metal classified under AWS A5.14 and associated with Alloy 625 (UNS N06625). Its combination of chromium, molybdenum and niobium provides a balance of strength and corrosion resistance for demanding industrial welding applications. This ERNiCrMo-3 nickel alloy welding wire is supplied in a tested diameter of 1.6 mm. The material test certificate reports 64.80% nickel, 21.14% chromium, 9.02% molybdenum and 3.77% niobium plus tanta

ERNiCrMo-3 Chemical Composition

The Ni-Cr-Mo-Nb alloy system is the defining feature of ERNiCrMo-3. Chromium and molybdenum contribute to corrosion resistance, while niobium is an important strengthening addition in Alloy 625 weld metal.
The following table compares the requirements printed on the supplied material test certificate with its actual wire chemistry results.
Chemical Composition (wt.%)
Element
MTC Requirement (%)
Actual Test Result (%)
Carbon (C)
≤ 0.10
0.011
Silicon (Si)
≤ 0.50
0.08
Manganese (Mn)
≤ 0.50
0.21
Sulfur (S)
≤ 0.015
0.001
Phosphorus (P)
≤ 0.020
0.002
Nickel (Ni)
≥ 58.0
64.80
Chromium (Cr)
20.0–23.0
21.14
Molybdenum (Mo)
8.0–10.0
9.02
Copper (Cu)
≤ 0.50
0.002
Aluminum (Al)
≤ 0.40
0.095
Titanium (Ti)
≤ 0.40
0.152
Niobium + Tantalum (Nb + Ta)
3.15–4.15
3.77
Iron (Fe)
≤ 5.0
0.58
Other Elements
≤ 0.50
0.443
Note: The requirement values are reproduced from the supplied MTC. Actual chemical analysis results apply to the tested batch and should not be interpreted as guaranteed values for every production batch.

Deposited Weld Metal Tensile Test

The supplied material test certificate includes a tensile test result for deposited weld metal.
Property
MTC Requirement
Actual Test Result
Tensile Strength
≥ 760 MPa
790 MPa
The tested deposited weld metal achieved a tensile strength of 790 MPa, exceeding the minimum value of 760 MPa stated on the certificate.

Where Is ERNiCrMo-3 Welding Wire Used?

ERNiCrMo-3 is commonly selected for welding Alloy 625 and compatible nickel-based alloys. It is also used in selected dissimilar-metal joints where corrosion resistance and weld-metal strength are important.
Typical application areas include:
  • Alloy 625 Fabrication: Welding compatible Alloy 625 components, piping and equipment.
  • Chemical Processing: Corrosion-resistant process equipment, vessels and industrial piping.
  • Offshore and Marine Engineering: Selected components exposed to demanding marine environments.
  • Petrochemical Equipment: Nickel alloy fabrication and maintenance.
  • Heat Exchangers: Components requiring corrosion-resistant weld metal.
  • Dissimilar-Metal Welding: Selected joints between nickel alloys, stainless steels and carbon or low-alloy steels, subject to engineering requirements.
  • Weld Overlay and Cladding: Applying nickel alloy weld metal to suitable base materials.
The appropriate filler metal should be selected according to the base-metal grade, service environment, design requirements and qualified welding procedure.

Welding Processes and Available Size

ERNiCrMo-3 solid welding wire is used in compatible gas-shielded welding processes.
GTAW (TIG)
  • Suitable for precision fabrication and controlled filler-metal placement.
  • Commonly used for root passes and smaller welding sections.
GMAW (MIG)
  • Suitable for compatible production welding and larger fabrication work.
  • Wire feeding and shielding gas requirements should follow the manufacturer's technical data.

ERNiCrMo-3 vs. Other Nickel Alloy Welding Wires

ERNiCrMo-3 belongs to the Alloy 625 filler-metal family. Its niobium-bearing Ni-Cr-Mo composition distinguishes it from other nickel alloy classifications.
AWS Classification
Associated Alloy
Main Alloy System
ERNiCrMo-3
Alloy 625
Ni-Cr-Mo-Nb
ERNiCrMo-4
Alloy C-276
Ni-Cr-Mo
ERNiCrMo-10
Alloy C-22
Ni-Cr-Mo-W
ERNiCrFe-5
Alloy 62
Ni-Cr-Fe-Nb
These welding filler metals have different chemical compositions and application requirements. They should not be treated as interchangeable without checking base-metal compatibility and service conditions.
Related GD WELD Product:

Request a Quote for ERNiCrMo-3 Welding Wire

Looking for ERNiCrMo-3 Alloy 625 welding wire for your fabrication or maintenance project?
Contact GD WELD with your required wire diameter, quantity, welding process and application details. Please specify any material certificate, inspection or packaging requirements.
Contact GD WELD for ERNiCrMo-3 product specifications, availability and quotation.

Continue browsing

More products from the catalog

Pair it with other pieces from the same collection or routine.

焊条无型号
Nickel & Special Alloys

ENiCrFe-3 Nickel Alloy Welding Electrode (Alloy 182)

ENiCrFe-3 is a nickel-chromium-iron covered electrode classified under AWS A5.11 and associated with Alloy 182 weld metal. It is designed for welding compatible nickel-based alloys and selected dissimilar-metal joints. Available in a tested diameter of 3.2 mm, this electrode has a deposited metal composition of 68.81% Ni, 15.88% Cr and 2.51% Nb. MTC test results show 610 MPa tensile strength, 440 MPa yield strength and 35% elongation.

View product
ERNiCrMo-10
Nickel & Special Alloys

ERNiCrMo-10 Alloy C-22 Nickel Alloy Welding Wire

ERNiCrMo-10 is a nickel-chromium-molybdenum-tungsten welding filler metal classified under AWS A5.14 and associated with Alloy C-22 (UNS N06022). Its high chromium and molybdenum content helps resist pitting and crevice corrosion in demanding chemical environments. This ERNiCrMo-10 welding wire has a tested diameter of 1.2 mm. Its material test certificate reports 22.18% Cr, 13.10% Mo and 2.97% W, highlighting its high-alloy composition for corrosion-resistant welding applications.

View product
钛焊丝_WH_800x800px
Nickel & Special Alloys

ERNiCrFe-5

ERNiCrFe-5 (SNi6062) is a Ni-Cr-Fe-Nb nickel-based solid wire with superior oxidation & chloride stress corrosion resistance and low hot cracking tendency. F...

View product