钛焊丝_WH_800x800px
Nickel & Special Alloys

ERTi-5

ERTi-5 is Ti-6Al-4V titanium alloy solid welding wire. Contains 5.5~6.75% aluminum and 3.5~4.5% vanadium for high strength. Suitable for GMAW(MIG/MAG) & GTAW...

ERTi-5 is Ti-6Al-4V titanium alloy solid welding wire. Contains 5.5~6.75% aluminum and 3.5~4.5% vanadium for high strength. Suitable for GMAW(MIG/MAG) & GTAW(TIG).

Features

· Ti-6Al-4V titanium alloy, high strength and excellent fatigue resistance, good seawater & chloride corrosion resistance
· Higher strength than ERTi-2, lightweight and non-magnetic
· Weld metal with good toughness and low cracking risk
⚠️ Titanium absorbs O, N, H easily at high temperature. Hot zones must be fully shielded by argon. Oxidation discoloration seriously reduces strength and toughness.

Shielding Gas

TIG/MIG: High-purity argon ≥99.99% (ultra-pure 99.995% preferred). Ar+He mixture available for deeper penetration on thick plates.
Back purge and trailing shield are required. Maintain shielding until hot zone cools below 400℃.
Gas flow rate: 12–18 L/min (front); 5–8 L/min (back purge)

Continue browsing

More products from the catalog

Pair it with other pieces from the same collection or routine.

焊条无型号
Nickel & Special Alloys

ENiCrFe-3 Nickel Alloy Welding Electrode (Alloy 182)

ENiCrFe-3 is a nickel-chromium-iron covered electrode classified under AWS A5.11 and associated with Alloy 182 weld metal. It is designed for welding compatible nickel-based alloys and selected dissimilar-metal joints. Available in a tested diameter of 3.2 mm, this electrode has a deposited metal composition of 68.81% Ni, 15.88% Cr and 2.51% Nb. MTC test results show 610 MPa tensile strength, 440 MPa yield strength and 35% elongation.

View product
ERNiCrMo-10
Nickel & Special Alloys

ERNiCrMo-3 Nickel Alloy Welding Wire (Alloy 625)

ERNiCrMo-3 is a nickel-chromium-molybdenum-niobium welding filler metal classified under AWS A5.14 and associated with Alloy 625 (UNS N06625). Its combination of chromium, molybdenum and niobium provides a balance of strength and corrosion resistance for demanding industrial welding applications. This ERNiCrMo-3 nickel alloy welding wire is supplied in a tested diameter of 1.6 mm. The material test certificate reports 64.80% nickel, 21.14% chromium, 9.02% molybdenum and 3.77% niobium plus tanta

View product
ERNiCrMo-10
Nickel & Special Alloys

ERNiCrMo-10 Alloy C-22 Nickel Alloy Welding Wire

ERNiCrMo-10 is a nickel-chromium-molybdenum-tungsten welding filler metal classified under AWS A5.14 and associated with Alloy C-22 (UNS N06022). Its high chromium and molybdenum content helps resist pitting and crevice corrosion in demanding chemical environments. This ERNiCrMo-10 welding wire has a tested diameter of 1.2 mm. Its material test certificate reports 22.18% Cr, 13.10% Mo and 2.97% W, highlighting its high-alloy composition for corrosion-resistant welding applications.

View product