E6013
General Welding Consumables

E6013 Welding Electrode

E6013 is a carbon steel SMAW electrode with high-titania potassium coating. It provides soft, stable arc and low spatter with attractive rippled weld beads, and excels at thin plate welding.

E6013 is a carbon steel SMAW electrode with high-titania potassium coating. It provides soft, stable arc and low spatter with attractive rippled weld beads, and excels at thin plate welding.

Coating Type: Rutile potassium type (High titania potassium coating)
Current Polarity: AC / DC+ / DC- available
Welding Process: SMAW, all-position welding.


Key Comparison E6010 / E6011 / E6013

E6010: Sodium cellulosic type, DC+ only. Highest penetration, specially for root pass welding of long-distance pipelines.
E6011: Potassium cellulosic type, AC/DC+ compatible. Good penetration, for field maintenance and general pipeline welding.
E6013: Rutile high-titania potassium type, AC/DC universal. Soft arc and excellent weld appearance; suitable for thin plates, light structures and cosmetic welding. Shallow penetration, NOT applicable for vertical-down pipeline root welding.


E6013 Features

· Stable & soft arc, low spatter, easy ignition and re-ignition.
· Slag easy to remove, fine and attractive weld bead.
· Medium-shallow penetration, ideal for thin plates without burn-through.
· Compatible with AC welding machines, perfect for tack welds and cosmetic welding.
· Less tolerant to heavy rust and surface contamination than cellulosic electrodes.


E6013 Welding Tips

· Compatible with AC, DC+ or DC-. Use DC- for thinner sheets to reduce penetration.
· Maintain short arc; long arc may cause porosity.
· Remove oil, moisture and heavy rust at welding area.

Common Defects
· Porosity: damp electrode, long arc, surface contaminants
· Lack of fusion: insufficient current, fast travel speed
· Burn-through: excessive welding current


E6013 Applicable Base Metals

Low carbon steel and light structural steel: Q235, S235JR, A106 Gr.B, thin carbon steel sheets.

E6013 Typical Applications:
Thin plate welding, light steel structure, equipment maintenance, cosmetic welds, tack welds.




Continue browsing

More products from the catalog

Pair it with other pieces from the same collection or routine.

实心焊丝
General Welding Consumables

ER70S-6 Welding Wire – MIG Wire & TIG Filler Rod

ER70S-6 is a manganese-silicon deoxidized solid carbon steel filler metal classified under AWS A5.18. It is used for GMAW (MIG/MAG) and GTAW (TIG) welding of compatible carbon steel materials. GD WELD supplies MIG wire in 0.8–1.2 mm and TIG filler rods in 1.6–4.0 mm. Separate material certificates provide chemical analysis, deposited metal properties and -30°C impact test results.

View product
ER70S-3
General Welding Consumables

ER70S-3 Solid Welding Wire

ER70S-3 is a manganese-silicon deoxidized solid carbon steel welding wire classified under AWS A5.18. It is commonly used for general fabrication and welding of mild and low-alloy steels, offering stable weld-metal properties and good bead quality. The supplied material certificate reports 0.076% carbon, 0.94% manganese and 0.65% silicon. Deposited weld metal achieved 527 MPa tensile strength, 446 MPa yield strength and 25% elongation, with an average impact value of 111.7 J at -20°C.

View product
焊条 焊条 焊条
General Welding Consumables

WE600 Special Alloy Steel Welding Electrode

WE600 is a specialty alloy steel welding electrode associated with repair welding and dissimilar-metal applications. It is considered for selected difficult-to-weld steels and industrial components. Confirm the original product identity, technical data sheet (TDS), and compatibility with the base metal before use.

View product