实心焊丝
General Welding Consumables

ER70S-6 Welding Wire – MIG Wire & TIG Filler Rod

ER70S-6 is a manganese-silicon deoxidized solid carbon steel filler metal classified under AWS A5.18. It is used for GMAW (MIG/MAG) and GTAW (TIG) welding of compatible carbon steel materials. GD WELD supplies MIG wire in 0.8–1.2 mm and TIG filler rods in 1.6–4.0 mm. Separate material certificates provide chemical analysis, deposited metal properties and -30°C impact test results.

Product Specifications

Item
Specification
Product Name
ER70S-6 Welding Wire
AWS Classification
ER70S-6
Standard
AWS A5.18
Product Type
Solid Carbon Steel Filler Metal
Welding Processes
GMAW (MIG/MAG) / GTAW (TIG)
MIG Wire Diameters
0.8 / 0.9 / 1.0 / 1.2 mm
TIG Filler Rod Diameters
1.6 / 2.0 / 2.4 / 3.2 / 4.0 mm
Main Alloy Elements
Carbon, Manganese, Silicon
Typical Base Material
Compatible Carbon Steel
Available diameters are subject to order requirements and supplier confirmation.

1. ER70S-6 MIG Welding Wire

ER70S-6 MIG wire is designed for GMAW of suitable carbon steel materials. Its manganese and silicon content provides deoxidizing action during welding.
Available diameters: 0.8 / 0.9 / 1.0 / 1.2 mm.

MIG Material Certificate – Chemical Composition

The following values are taken from the supplied MIG welding wire material certificate.
Chemical Composition (wt.%)
Element
Certificate Requirement (%)
Actual Result (%)
C
0.06–0.15
0.074
Mn
1.40–1.85
1.46
Si
0.80–1.15
0.85
S
≤0.025
0.013
P
≤0.025
0.015
Cr
≤0.15
0.002
Ni
≤0.15
0.001
Mo
≤0.15
0.002
V
≤0.03
0.001
Cu
≤0.50
0.12

MIG Material Certificate – Mechanical Properties

The following results are from the deposited weld metal tests in the MIG certificate.
Property
Certificate Requirement
Actual Result
Tensile Strength
≥500 MPa
540 MPa
Yield Strength
≥420 MPa
450 MPa
Elongation
≥22%
27%
Impact Test Temperature
-30°C
-30°C
Impact Energy
≥27 J
109 / 120 / 122 J
Average Impact Energy
—
117 J
MIG Inspection Results
Inspection Item
Result
Radiographic Test
Grade I
Face Bend Test
OK
Back Bend Test
OK

2. ER70S-6 TIG Filler Rod

ER70S-6 TIG filler rods are used for GTAW of compatible carbon steel materials. The solid rod form allows controlled filler metal addition during manual TIG welding.
Available diameters: 1.6 / 2.0 / 2.4 / 3.2 / 4.0 mm.

TIG Material Certificate – Chemical Composition

The following values are taken from the supplied TIG filler rod material certificate.
Chemical Composition (wt.%)
Element
Certificate Requirement (%)
Actual Result (%)
C
0.06–0.15
0.077
Mn
1.40–1.85
1.45
Si
0.80–1.15
0.85
S
≤0.025
0.014
P
≤0.025
0.015
Cr
≤0.15
0.01
Ni
≤0.15
0.01
Mo
≤0.15
0.001
V
≤0.03
0.001
Cu
≤0.50
0.12

TIG Material Certificate – Mechanical Properties

The following results are from the deposited weld metal tests in the TIG certificate.
Property
Certificate Requirement
Actual Result
Tensile Strength
≥490 MPa
541 MPa
Yield Strength
≥390 MPa
448 MPa
Elongation
≥18%
27%
Impact Test Temperature
-30°C
-30°C
Impact Energy
≥27 J
112 / 102 / 120 J
Average Impact Energy
—
111.3 J
TIG Inspection Results
Inspection Item
Result
Radiographic Test
Grade I

3. Applications of ER70S-6 Welding Wire

ER70S-6 is commonly used for GMAW and GTAW of compatible mild steel and carbon steel materials.
Typical applications include:
  • Structural steel fabrication.
  • Machinery and equipment manufacturing.
  • Automotive components and frames.
  • Carbon steel pipe welding.
  • Sheet metal and general metal fabrication.
  • Containers, trailers and industrial equipment.
  • Maintenance and repair work.
The appropriate welding process and filler metal diameter depend on base metal thickness, joint preparation and the qualified welding procedure.

4. ER70S-6 vs. Other Carbon Steel Welding Wires

Choosing the right carbon steel filler metal depends on the base material, alloy requirements and welding procedure.
  • ER70S-3 Welding Wire: A related carbon steel filler metal with different manganese and silicon content.
These classifications are not interchangeable. Confirm filler metal selection against the base material, service conditions and qualified welding procedure.

5. Request a Quote for ER70S-6 Welding Wire

Looking for ER70S-6 MIG welding wire or TIG filler rods?
Send GD WELD your required welding process, diameter, quantity and application details. You can also specify requirements for material test certificates, mechanical testing and inspection documents.
Contact GD WELD for ER70S-6 welding wire specifications, availability and quotation.

Continue browsing

More products from the catalog

Pair it with other pieces from the same collection or routine.

ER70S-3
General Welding Consumables

ER70S-3 Solid Welding Wire

ER70S-3 is a manganese-silicon deoxidized solid carbon steel welding wire classified under AWS A5.18. It is commonly used for general fabrication and welding of mild and low-alloy steels, offering stable weld-metal properties and good bead quality. The supplied material certificate reports 0.076% carbon, 0.94% manganese and 0.65% silicon. Deposited weld metal achieved 527 MPa tensile strength, 446 MPa yield strength and 25% elongation, with an average impact value of 111.7 J at -20°C.

View product
焊条 焊条 焊条
General Welding Consumables

WE600 Special Alloy Steel Welding Electrode

WE600 is a specialty alloy steel welding electrode associated with repair welding and dissimilar-metal applications. It is considered for selected difficult-to-weld steels and industrial components. Confirm the original product identity, technical data sheet (TDS), and compatibility with the base metal before use.

View product
E7018_WH_800x800px
General Welding Consumables

E7018

E7018 is a carbon steel SMAW electrode with low-hydrogen potassium iron powder coating (basic low-hydrogen type). Compatible with AC and DC+.

View product