ER70S-3
General Welding Consumables

ER70S-3 Solid Welding Wire

ER70S-3 is a manganese-silicon deoxidized solid carbon steel welding wire classified under AWS A5.18. It is commonly used for general fabrication and welding of mild and low-alloy steels, offering stable weld-metal properties and good bead quality. The supplied material certificate reports 0.076% carbon, 0.94% manganese and 0.65% silicon. Deposited weld metal achieved 527 MPa tensile strength, 446 MPa yield strength and 25% elongation, with an average impact value of 111.7 J at -20°C.

Chemical Composition of ER70S-3 Welding Wire

ER70S-3 uses manganese and silicon as deoxidizing elements. The following table shows the welding wire chemical composition requirements and actual analysis from the supplied material certificate.
Chemical Composition (wt.%)
Element
MTC Requirement (%)
Actual Result (%)
C
0.06–0.15
0.076
Mn
0.90–1.40
0.94
Si
0.45–0.75
0.65
S
≤0.025
0.009
P
≤0.025
0.010
Cr
≤0.15
0.01
Ni
≤0.15
0.01
Mo
≤0.15
0.01
V
≤0.03
0.001
Cu
≤0.50
0.10
Note: The requirement values are reproduced from the supplied material certificate. Actual results represent the tested welding wire, not deposited weld metal.

Mechanical Properties of Deposited Metal

The following results are taken from the deposited metal mechanical test section of the certificate.
Property
MTC Requirement
Actual Result
Tensile Strength
490–670 MPa
527 MPa
Yield Strength
≥390 MPa
446 MPa
Elongation
≥18%
25%
Impact Test Temperature
-20°C
-20°C
Impact Energy
≥27 J
120 / 110 / 105 J
Average Impact Energy
—
111.7 J
The three Charpy impact specimens recorded 120 J, 110 J and 105 J at -20°C, giving an average of 111.7 J.
Note: These are test results and requirements stated in the supplied certificate. They should not be interpreted as guaranteed results for every production batch.

Applications of ER70S-3 Welding Wire

ER70S-3 is commonly selected for general-purpose welding of mild steel and suitable low-alloy steel materials.
Typical applications include:
  • Steel structures and general metal fabrication.
  • Machinery and equipment manufacturing.
  • Automotive frames and metal components.
  • Trailers, storage containers and metal structures.
  • Agricultural and construction equipment.
  • General industrial fabrication and repair.
For low-temperature service, verify the base material, design temperature, impact requirements and qualified welding procedure before selecting the filler metal.

ER70S-3 vs. Other Solid Welding Wires

ER70S-3 and other carbon steel or low-alloy solid welding wires have different chemical compositions and application requirements.
For general carbon steel applications, compare the required properties of ER70S-3 with other applicable AWS A5.18 classifications.
For specified molybdenum-alloyed applications, see ER70S-A1 Welding Wire, which is designed for compatible low-alloy steels and selected elevated-temperature applications.
For P11 and T11 steel welding, ER80S-B2 Welding Wire provides a different Cr-Mo alloy system. It is intended for compatible 1.25Cr-0.5Mo steels.
These products are not direct substitutes for ER70S-3. Always select welding consumables according to the base material, applicable specification and qualified welding procedure.

Quality Inspection Results

The supplied EN 10204 3.1 certificate records the following inspection results:
Inspection Item
Requirement
Actual Result
Appearance Inspection
—
Passed
Process Property
—
Good
Radiographic Test
Grade I
Grade I
Face Bend Test
D=4a, 180°
Passed
Root Bend Test
D=4a, 180°
Passed
These results provide additional quality information for the tested batch.

Request a Quote for ER70S-3 Welding Wire

Looking for ER70S-3 solid welding wire for your carbon steel fabrication project?
Contact GD WELD with your required diameter, quantity, base material and application details. Please specify any requirements for EN 10204 3.1 certificates, mechanical testing and inspection documents.
Contact GD WELD for ER70S-3 welding wire specifications, availability and quotation.

Continue browsing

More products from the catalog

Pair it with other pieces from the same collection or routine.

实心焊丝
General Welding Consumables

ER70S-6 Welding Wire – MIG Wire & TIG Filler Rod

ER70S-6 is a manganese-silicon deoxidized solid carbon steel filler metal classified under AWS A5.18. It is used for GMAW (MIG/MAG) and GTAW (TIG) welding of compatible carbon steel materials. GD WELD supplies MIG wire in 0.8–1.2 mm and TIG filler rods in 1.6–4.0 mm. Separate material certificates provide chemical analysis, deposited metal properties and -30°C impact test results.

View product
焊条 焊条 焊条
General Welding Consumables

WE600 Special Alloy Steel Welding Electrode

WE600 is a specialty alloy steel welding electrode associated with repair welding and dissimilar-metal applications. It is considered for selected difficult-to-weld steels and industrial components. Confirm the original product identity, technical data sheet (TDS), and compatibility with the base metal before use.

View product
E7018_WH_800x800px
General Welding Consumables

E7018

E7018 is a carbon steel SMAW electrode with low-hydrogen potassium iron powder coating (basic low-hydrogen type). Compatible with AC and DC+.

View product