E7014_WH_800x800px
General Welding Consumables

E7014

E7014 is a carbon steel SMAW electrode with rutile iron powder coating. Iron powder in the coating delivers higher deposition efficiency than E6013 for improved welding productivity. Rated at 70ksi tensile strength, it works with both AC and DC and is easy to operate, ideal for efficient welding of medium-thick carbon steel.

E7014 is a carbon steel SMAW electrode with rutile iron powder coating. Iron powder in the coating delivers higher deposition efficiency than E6013 for improved welding productivity. Rated at 70ksi tensile strength, it works with both AC and DC and is easy to operate, ideal for efficient welding of medium-thick carbon steel.

Coating Type: Rutile iron powder type
Current Polarity: AC / DC+ / DC- available
Welding Process: SMAW, all-position welding



Comparison: E6013 vs E7014

E6013: Rutile high-titania potassium type, no iron powder, 60ksi strength, average deposition efficiency. Suitable for thin plates, cosmetic welding and light structures.
E7014: Rutile iron powder type, 70ksi strength, high deposition efficiency. Suitable for medium-thick plates, high-efficiency fillet welds and load-bearing steel structures.


E7014 Features

· Stable soft arc with low spatter, easy ignition and re-ignition.
· Iron powder coated for higher deposition efficiency, ideal for mass fillet welds.
· Slag easy to remove with attractive weld beads.
· Compatible with AC and DC power sources for all-position welding.
· Higher strength grade than E6013 for load-bearing steel structures.
· Note: Moderate penetration, not suitable for vertical-down pipeline root welding; poor tolerance to heavy rust and oil contamination.


E7014 Welding Tips

· Usable with AC, DC+ or DC-.
· Keep short arc; long arc may cause porosity and slag inclusion.
· Remove oil, moisture and heavy rust on groove area.

Common Defects
· Porosity: damp electrode, excessive arc length, surface contaminants
· Slag inclusion: improper travel technique, insufficient inter-pass cleaning
· Lack of fusion: insufficient current, fast travel speed


Applicable Base Metals

Low carbon steel and mild low alloy steel: Q235, Q355, S235JR, S275JR, A106 Gr.B


Typical Applications

Building steel structures, machinery frames, vehicle parts, storage tanks, mass production fillet welds and equipment maintenance.






Continue browsing

More products from the catalog

Pair it with other pieces from the same collection or routine.

实心焊丝
General Welding Consumables

ER70S-6 Welding Wire – MIG Wire & TIG Filler Rod

ER70S-6 is a manganese-silicon deoxidized solid carbon steel filler metal classified under AWS A5.18. It is used for GMAW (MIG/MAG) and GTAW (TIG) welding of compatible carbon steel materials. GD WELD supplies MIG wire in 0.8–1.2 mm and TIG filler rods in 1.6–4.0 mm. Separate material certificates provide chemical analysis, deposited metal properties and -30°C impact test results.

View product
ER70S-3
General Welding Consumables

ER70S-3 Solid Welding Wire

ER70S-3 is a manganese-silicon deoxidized solid carbon steel welding wire classified under AWS A5.18. It is commonly used for general fabrication and welding of mild and low-alloy steels, offering stable weld-metal properties and good bead quality. The supplied material certificate reports 0.076% carbon, 0.94% manganese and 0.65% silicon. Deposited weld metal achieved 527 MPa tensile strength, 446 MPa yield strength and 25% elongation, with an average impact value of 111.7 J at -20°C.

View product
焊条 焊条 焊条
General Welding Consumables

WE600 Special Alloy Steel Welding Electrode

WE600 is a specialty alloy steel welding electrode associated with repair welding and dissimilar-metal applications. It is considered for selected difficult-to-weld steels and industrial components. Confirm the original product identity, technical data sheet (TDS), and compatibility with the base metal before use.

View product