E7015_WH_800x800px
General Welding Consumables

E7015

E7015 is a carbon steel SMAW electrode with low-hydrogen sodium coating (basic low-hydrogen type). The weld metal has low diffusible hydrogen, outstanding ductility and low-temperature toughness with strong resistance to cold cracking. It is ideal for critical restrained thick-plate load-bearing structures.

E7015 is a carbon steel SMAW electrode with low-hydrogen sodium coating (basic low-hydrogen type).
The weld metal has low diffusible hydrogen, outstanding ductility and low-temperature toughness with strong resistance to cold cracking. It is ideal for critical restrained thick-plate load-bearing structures.

Coating Type: Low-hydrogen sodium type
Current Polarity: DC+ (DC reverse polarity) Only
Welding Process: SMAW, all-position welding


Comparison E7014 / E7015 / E7018

E7014: Rutile iron powder type, AC/DC compatible. Good operating performance & nice weld appearance. Medium strength for general steel structures and fillet welds. Acid coating, poor crack resistance.
E7015: Low-hydrogen sodium type, DC+ only. Low hydrogen, high toughness and superior crack resistance. For critical pressure vessels, bridges and shipworks. No iron powder, average deposition efficiency; AC unavailable.
E7018: Low-hydrogen potassium iron powder type, AC/DC+ compatible. Low hydrogen plus iron powder for higher efficiency. Suitable for heavy-duty structures and general low-hydrogen applications. Works with both AC and DC power.


E7015 Features

· Stiff & stable arc with low spatter, good resistance to magnetic arc blow. Slag easy to remove and uniform weld bead.
· Low-hydrogen coating provides excellent crack resistance and low-temperature toughness.
⚠ Only DC+ available, incompatible with AC welders. Sensitive to surface contaminants; electrodes require high-temperature baking. Not recommended for thin plate & cosmetic welding.


E7015 Welding Tips

· Only DC+ reverse polarity can be adopted.
· Use short arc & narrow bead technique.
· Fully clean oil, moisture and rust on groove area.

E7015 Common Defects
Porosity: damp electrode, insufficient baking, long arc, surface impurities
Cold cracking: moisture absorption, inadequate preheat, fast cooling rate
Slag inclusion: improper travel speed, insufficient inter-pass cleaning


E7015 Baking Instruction

Bake electrodes at 350~380℃ for 60 mins before use. Keep warm at 100~150℃ after baking. Rebaking ≤2 times.


E7015 Applicable Base Metals

Low carbon steel & mild low alloy steel: Q235, Q355 (16Mn), S235JR, S275JR, A106 Gr.B, Ship Grade A/B/D steel plates

Typical Applications
Pressure vessels, bridges, heavy machinery, ship components, thick load-bearing steel structures, critical high-stress welds











Continue browsing

More products from the catalog

Pair it with other pieces from the same collection or routine.

实心焊丝
General Welding Consumables

ER70S-6 Welding Wire – MIG Wire & TIG Filler Rod

ER70S-6 is a manganese-silicon deoxidized solid carbon steel filler metal classified under AWS A5.18. It is used for GMAW (MIG/MAG) and GTAW (TIG) welding of compatible carbon steel materials. GD WELD supplies MIG wire in 0.8–1.2 mm and TIG filler rods in 1.6–4.0 mm. Separate material certificates provide chemical analysis, deposited metal properties and -30°C impact test results.

View product
ER70S-3
General Welding Consumables

ER70S-3 Solid Welding Wire

ER70S-3 is a manganese-silicon deoxidized solid carbon steel welding wire classified under AWS A5.18. It is commonly used for general fabrication and welding of mild and low-alloy steels, offering stable weld-metal properties and good bead quality. The supplied material certificate reports 0.076% carbon, 0.94% manganese and 0.65% silicon. Deposited weld metal achieved 527 MPa tensile strength, 446 MPa yield strength and 25% elongation, with an average impact value of 111.7 J at -20°C.

View product
焊条 焊条 焊条
General Welding Consumables

WE600 Special Alloy Steel Welding Electrode

WE600 is a specialty alloy steel welding electrode associated with repair welding and dissimilar-metal applications. It is considered for selected difficult-to-weld steels and industrial components. Confirm the original product identity, technical data sheet (TDS), and compatibility with the base metal before use.

View product