E7016_WH_800x800px
General Welding Consumables

E7016

E7016 is a carbon steel SMAW electrode with low-hydrogen potassium coating, compatible with AC and DC+. The basic low-hydrogen system delivers good low-temperature toughness and outstanding cold crack resistance, suitable for critical steel structures at field sites without DC power supply.

E7016 is a carbon steel SMAW electrode with low-hydrogen potassium coating, compatible with AC and DC+.
The basic low-hydrogen system delivers good low-temperature toughness and outstanding cold crack resistance, suitable for critical steel structures at field sites without DC power supply.

Coating Type: Low-hydrogen potassium type
Current Polarity: AC / DC+ (DC reverse polarity)  
Welding Process: SMAW,All position weld


Comparison: E7015 / E7016 / E7018

E7015: Low-hydrogen sodium type, DC+ only. Superior toughness, AC unavailable.
E7016: Low-hydrogen potassium type, AC/DC+ compatible. Low-hydrogen without iron powder, average efficiency.
E7018: Low-hydrogen potassium iron powder type, AC/DC+ compatible. Iron powder added for highest deposition efficiency.


E7016 Features

· Stable arc and moderate spatter.
· Basic low-hydrogen formulation provides good weld toughness and cold crack resistance.
· AC/DC+ dual polarity, compatible with field AC welders.
· Easy slag removal, suitable for all-position welding.
· Note: High-temperature baking is mandatory. Sensitive to rust and oil contaminants. No iron powder, average deposition efficiency.


E7016 Welding Tips

· Compatible with AC or DC+.
· Use short arc and narrow bead technique.
· Remove oil, moisture and heavy rust around the groove.

E7016 Common Defects
Porosity: damp electrode, insufficient baking, excessive arc length
Cold cracking: electrode moisture, insufficient preheat, rapid cooling
Slag inclusion: excessive weave width, incomplete inter-pass cleaning


E7016 Applicable Base Metals

Low carbon steel & mild low alloy steel: Q235, Q355 (16Mn), S235JR, S275JR, A106 Gr.B, Ship Grade A/B/D steel plates

Typical Applications:
Bridges, engineering machinery, storage tanks, critical pipeline welds, load-bearing structures for field sites without DC power supply.







Continue browsing

More products from the catalog

Pair it with other pieces from the same collection or routine.

实心焊丝
General Welding Consumables

ER70S-6 Welding Wire – MIG Wire & TIG Filler Rod

ER70S-6 is a manganese-silicon deoxidized solid carbon steel filler metal classified under AWS A5.18. It is used for GMAW (MIG/MAG) and GTAW (TIG) welding of compatible carbon steel materials. GD WELD supplies MIG wire in 0.8–1.2 mm and TIG filler rods in 1.6–4.0 mm. Separate material certificates provide chemical analysis, deposited metal properties and -30°C impact test results.

View product
ER70S-3
General Welding Consumables

ER70S-3 Solid Welding Wire

ER70S-3 is a manganese-silicon deoxidized solid carbon steel welding wire classified under AWS A5.18. It is commonly used for general fabrication and welding of mild and low-alloy steels, offering stable weld-metal properties and good bead quality. The supplied material certificate reports 0.076% carbon, 0.94% manganese and 0.65% silicon. Deposited weld metal achieved 527 MPa tensile strength, 446 MPa yield strength and 25% elongation, with an average impact value of 111.7 J at -20°C.

View product
焊条 焊条 焊条
General Welding Consumables

WE600 Special Alloy Steel Welding Electrode

WE600 is a specialty alloy steel welding electrode associated with repair welding and dissimilar-metal applications. It is considered for selected difficult-to-weld steels and industrial components. Confirm the original product identity, technical data sheet (TDS), and compatibility with the base metal before use.

View product