E7018_WH_800x800px
General Welding Consumables

E7018

E7018 is a carbon steel SMAW electrode with low-hydrogen potassium iron powder coating (basic low-hydrogen type). Compatible with AC and DC+.

E7018 is a carbon steel SMAW electrode with low-hydrogen potassium iron powder coating (basic low-hydrogen type). Compatible with AC and DC+.

Iron powder in coating offers higher deposition efficiency than E7016. Weld metal features low diffusible hydrogen, excellent low-temperature toughness and strong cold crack resistance. It balances productivity and weld quality for various critical load-bearing steel structures.

Coating Type: Low-hydrogen potassium iron powder type
Current Polarity: AC / DC+ (DC reverse polarity) available
Welding Process: SMAW, all-position welding


Comparison: E7015 / E7016 / E7018

E7015: Low-hydrogen sodium type, DC+ only. Excellent toughness, no iron powder, average efficiency, AC unavailable.
E7016: Low-hydrogen potassium type, AC/DC+ compatible. Low-hydrogen without iron powder, medium efficiency for field AC welding.
E7018: Low-hydrogen potassium iron powder type, AC/DC+ compatible. With iron powder for highest deposition efficiency, combining low-hydrogen toughness and high productivity.


E7018 Features

· Stable soft arc with moderate spatter and good slag removability.
· Basic low-hydrogen formula provides excellent crack resistance and high impact toughness.
· Iron powder added for higher deposition efficiency than E7015 & E7016. AC/DC+ compatible for all-position welding, convenient for field AC welding sites.
· Note: High-temperature baking is required. Sensitive to oil and rust contaminants.


E7018 Welding Tips

· Compatible with AC or DC+.
· Adopt short arc and narrow bead welding.
· Thoroughly clean oil, moisture and heavy rust on welding groove.

E7018 Common Defects
Porosity: damp electrode, insufficient baking, long arc, surface contaminants
Cold cracking: electrode moisture absorption, inadequate preheat, fast cooling rate
Slag inclusion: excessive weaving width, incomplete inter-pass cleaning


E7018 Applicable Base Metals

Low carbon steel & mild low alloy steel: Q235, Q355 (16Mn), S235JR, S275JR, A106 Gr.B, Ship Grade A/B/D steel plates

Typical Applications
Pressure vessels, bridges, heavy machinery, storage tanks, lifting equipment, critical thick-plate welds and field construction.




Continue browsing

More products from the catalog

Pair it with other pieces from the same collection or routine.

实心焊丝
General Welding Consumables

ER70S-6 Welding Wire – MIG Wire & TIG Filler Rod

ER70S-6 is a manganese-silicon deoxidized solid carbon steel filler metal classified under AWS A5.18. It is used for GMAW (MIG/MAG) and GTAW (TIG) welding of compatible carbon steel materials. GD WELD supplies MIG wire in 0.8–1.2 mm and TIG filler rods in 1.6–4.0 mm. Separate material certificates provide chemical analysis, deposited metal properties and -30°C impact test results.

View product
ER70S-3
General Welding Consumables

ER70S-3 Solid Welding Wire

ER70S-3 is a manganese-silicon deoxidized solid carbon steel welding wire classified under AWS A5.18. It is commonly used for general fabrication and welding of mild and low-alloy steels, offering stable weld-metal properties and good bead quality. The supplied material certificate reports 0.076% carbon, 0.94% manganese and 0.65% silicon. Deposited weld metal achieved 527 MPa tensile strength, 446 MPa yield strength and 25% elongation, with an average impact value of 111.7 J at -20°C.

View product
焊条 焊条 焊条
General Welding Consumables

WE600 Special Alloy Steel Welding Electrode

WE600 is a specialty alloy steel welding electrode associated with repair welding and dissimilar-metal applications. It is considered for selected difficult-to-weld steels and industrial components. Confirm the original product identity, technical data sheet (TDS), and compatibility with the base metal before use.

View product