444
Metal & Flux Cored Wire

E91T1-B9 Flux Cored Welding Wire

E91T1-B9 is a 9Cr-1Mo-V-Nb flux cored welding wire for welding P91, T91 and Grade 91 creep-resistant steels. Classified under AWS A5.29 / ASME SFA-5.29, it is designed for high-temperature power generation, steam piping, pressure equipment and refinery applications. E91T1-B9 is available in E91T1-B9C and E91T1-B9M shielding-gas classifications for gas-shielded FCAW.

P91 / Grade 91 Welding

E91T1-B9 is developed for modified 9Cr-1Mo creep-resistant steels with controlled additions of niobium, vanadium and nitrogen.
Typical base materials include:
  • ASTM A335 P91 pipe
  • ASTM A213 T91 tube
  • ASTM A387 Grade 91 plate
  • ASTM A182 F91 forgings
  • A369 FP91 piping
  • Similar Grade 91 fittings and castings
Typical applications include main steam piping, hot-reheat piping, boiler components, turbine castings, headers, valves, power plants and oil refineries.

What Makes E91T1-B9 Different?

The key feature of E91T1-B9 is its 9Cr-1Mo-V-Nb weld-metal system.
  • 9% Cr: Supports oxidation and high-temperature service performance
  • Mo: Contributes to high-temperature strength
  • V + Nb + N: Important alloying additions for the creep-resistant Grade 91 system
  • FCAW process: Offers higher deposition productivity than manual covered-electrode welding
  • Rutile flux system: Supports stable arc behavior and slag removal in suitable commercial products
Manufacturer data specifically describes E91T1-B9 as a P91-type consumable with improved long-term creep resistance and high-temperature performance.

E91T1-B9C or E91T1-B9M?

Classification
Shielding Gas
E91T1-B9C
100% CO₂
E91T1-B9M
Ar/CO₂ mixed gas
Commercial B9M products commonly use approximately 75–80% Ar with CO₂ balance, while exact gas composition should follow the manufacturer's TDS and qualified WPS.

AWS Classification & Weld Metal

Item
Specification
AWS
E91T1-B9C / E91T1-B9M
ASME
SFA-5.29
Welding Process
FCAW-G
Polarity
DC+
Typical Wire Diameter
1.2–1.6 mm
Alloy System
9Cr-1Mo-V-Nb

AWS Weld Metal Chemistry

Element
AWS Reference (%)
C
0.08–0.13
Mn
0.60–1.20
Si
≤0.50
P
≤0.020
S
≤0.015
Cr
8.0–10.0
Ni
≤0.80
Mo
0.85–1.20
Nb
0.02–0.07
V
0.15–0.25
N
0.02–0.07
Cu
≤0.15
Al
≤0.40
Ni + Mn
≤1.50
These are AWS classification limits; actual deposited chemistry depends on the specific consumable, shielding gas and welding procedure.

Mechanical Properties

AWS classification minimum requirements include:
Property
Minimum
Yield Strength
≥565 MPa
Tensile Strength
≥690 MPa
Elongation
≥16%
Typical commercial results may be higher after PWHT. For example, Hyundai reports approximately 625–632 MPa yield strength, 728–734 MPa tensile strength and 20–21% elongation after 760°C × 2 h PWHT.

Reference Welding Parameters

Commercial E91T1-B9 products use different parameter ranges depending on diameter, shielding gas and welding position.
Diameter
Reference Current
1.2 mm
120–300 A
1.4 mm
200–350 A
1.6 mm
200–400 A
For a specific 1.2 mm product, published manufacturer data may use a narrower operating window such as 140–170 A / 24–26 V. Therefore, final current and voltage should always follow the manufacturer's TDS and qualified WPS.

P91 Welding and PWHT

P91 / Grade 91 welding requires strict control of the welding procedure because the final properties depend on the alloy system and heat treatment.
Important variables include:
Preheat → Interpass Temperature → Heat Input → Hydrogen Control → PWHT
Published E91T1-B9 data commonly uses PWHT around 760°C, with the exact temperature, holding time and cooling requirements determined by the applicable code and qualified WPS.

Product Specification

Product: E91T1-B9 Flux Cored Welding Wire Classifications: E91T1-B9C / E91T1-B9M Primary Materials: P91 / T91 / Grade 91 Alloy System: 9Cr-1Mo-V-Nb Process: FCAW-G Typical Diameters: 1.2 / 1.4 / 1.6 mm
GD WELD supplies E91T1-B9 flux cored welding wire for power generation, high-temperature piping, pressure equipment, petrochemical and refinery applications.

Tags

E91T1-B9, E91T1-B9C, E91T1-B9M, E91T1-B9 flux cored welding wire, P91 welding wire, P91 flux cored welding wire, Grade 91 welding wire, T91 welding wire, 9Cr-1Mo-V-Nb welding wire, P91 pipe welding wire, P91 FCAW wire, Grade 91 FCAW wire, creep resistant steel welding wire, high temperature welding wire

For other Cr-Mo steel welding applications, see ER80S-B8 for P9/T9, ER90S-B3 for P22/T22, and ER80S-B6 for P5/T5.


Continue browsing

More products from the catalog

Pair it with other pieces from the same collection or routine.

不锈钢药芯
Metal & Flux Cored Wire

E307LT1-1 Stainless Steel Flux Cored Welding Wire

E307T1-1 stainless steel flux cored welding wire is an AWS A5.22-classified consumable for gas-shielded flux-cored arc welding. Its high-manganese austenitic weld metal is designed for selected difficult-to-weld materials, dissimilar-metal joints and applications requiring good resistance to weld cracking.

View product
药芯焊丝
Metal & Flux Cored Wire

E81T5-B6C Cr-Mo Flux Cored Welding Wire

E81T5-B6C is a Cr-Mo low alloy steel flux cored welding wire classified under AWS A5.29/A5.29M in the supplied inspection report. The tested 1.2 mm wire uses CO₂ shielding gas and contains 5.2% chromium and 0.50% molybdenum. It is designed for specified Cr-Mo steel welding applications where the required classification and weld metal properties are confirmed. Check base metal compatibility, welding procedure and heat treatment requirements before use.

View product
不锈钢药芯
Metal & Flux Cored Wire

E410T1-1C Stainless Steel Flux Cored Welding Wire

E410T1-1C stainless steel flux cored welding wire is classified under AWS A5.22/A5.22M in the supplied test report. Available test data covers 1.2 mm wire, CO₂ shielding gas, chemical composition, and deposited metal mechanical properties for technical evaluation.

View product