豆包 (1)
Welding Wire

ER312

ER312 is copper-coated high-alloy 29Cr-9Ni austenitic stainless steel solid wire, suitable for GMAW (MIG/MAG) and GTAW (TIG) welding.

ER312
ER312 is copper-coated high-alloy 29Cr-9Ni austenitic stainless steel solid wire, suitable for GMAW (MIG/MAG) and GTAW (TIG) welding.

Features

• Ultra-high ferrite content (25–40 FN), top-tier anti-hot-crack performance among stainless steel wires
• High chromium content provides good high-temperature oxidation resistance
• Weld deposit has high tensile strength and slight work hardening, certain wear resistance
• Stable arc, good molten pool spreadability, smooth forming for hard-to-weld steels
• Continuous service temperature: ≤420°C

Diameter & Packaging

MIG:0.8 / 1.0 / 1.2 / 1.6 mm 1KG Spool/5KG Spool / 15KG Spool
TIG:2.0 / 2.4 / 3.2 mm /4.0mm 5kg plastic tube

Welding Parameters

Polarity: DC+ (DCRP, Direct Current Reverse Polarity)
MIG / MAG
Shielding Gas: 98%Ar + 2%O₂
Gas Flow Rate: 20~25 L/min
Reference Current for common sizes:
Φ0.8mm:80–160 A
Φ1.0mm:110–220 A
Φ1.2mm:150–240 A
TIG (GTAW)
Shielding Gas: 99.99% High Purity Argon Gas Flow Rate: 10–16 L/min. Back purging is recommended for thick plates.
Base Metal Matching
For unknown composition steels, high-carbon steel, manganese steel, martensitic stainless steel & austenitic stainless steel dissimilar joints; transition buffer layer before hard surfacing.

Applications

Hard-to-weld alloy repair, armor plate, furnace high-temperature parts, dissimilar steel transition layer, tool steel repair, boiler pipe cladding.
⚠️ Not used for welding pure 304/316 stainless steel (excessive alloy, poor cost performance)
Welding Precautions
• Thoroughly remove oil, rust, scale and moisture from grooves before welding to avoid porosity. Use stainless steel-specific grinding wheels/wire brushes to prevent carbon steel contamination.
• Strictly control interpass temperature below 100°C to avoid brittle phases.
• Wind protection is required for outdoor welding if wind speed exceeds 1.0 m/s to avoid weld oxidation.
• Mainly used as transition buffer layer, not for final corrosion-resistant working layer.
ER312 vs ER309L
✅ ER312 (29Cr-9Ni): Ultimate anti-crack filler for unknown steel, high-carbon steel, difficult dissimilar joints
✅ ER309L (23Cr-13Ni): Conventional stainless-carbon steel dissimilar welding, routine surfacing cladding
Important Cautions
• Do not use pure CO₂ shielding gas; carbon pickup will reduce high-temperature oxidation resistance.
• Not applicable for long-term service under strong chloride corrosion.

Continue browsing

More products from the catalog

Pair it with other pieces from the same collection or routine.

1
Welding Wire

ER420 Stainless Steel Welding Wire | AWS A5.9 TIG & MIG Filler Metal

ER420 is a high-carbon 13% chromium martensitic stainless steel solid welding wire and hardfacing filler metal classified under AWS A5.9. With higher carbon content than ER410, it delivers superior weld-metal hardness and abrasion resistance, making it ideal for welding matching 420 stainless steel and repairing or surfacing wear-resistant components.

View product
实心焊丝
Welding Wire

ER309LMo Stainless Steel Welding Wire (S309LMo)

ER309LMo (S309LMo) is a molybdenum-alloyed chromium-nickel stainless steel welding wire. Its higher molybdenum content distinguishes it from conventional ER309L and makes it suitable for applications where a Mo-containing filler metal is specified. GD WELD offers ER309LMo welding wire in 0.8, 1.0, 1.2, 1.6, 2.0, 2.4 and 3.2 mm diameters. The supplied 1.2 mm material certificate reports 23.18% chromium, 13.86% nickel, 2.12% molybdenum and 620 MPa deposited weld metal tensile strength.

View product
不锈钢实心焊丝
Welding Wire

ER410NiMo / H05Cr12Ni4Mo Stainless Steel Welding Wire

ER410NiMo is a chromium-nickel-molybdenum stainless steel welding wire designation listed in AWS A5.9-2022. The supplied material certificate also identifies the product as H05Cr12Ni4Mo. GD WELD supplies this welding wire in a tested diameter of 1.2 mm. Its material certificate reports 12.27% chromium, 4.72% nickel, 0.49% molybdenum and a deposited weld metal tensile strength of 800 MPa.

View product