all1_WH_800x800px
General Welding Consumables

ER70S-2

ER70S-2 is copper-coated low alloy solid wire, suitable for GMAW (MIG/MAG) and GTAW (TIG) welding processes.

ER70S-2
ER70S-2 is copper-coated low alloy solid wire, suitable for GMAW (MIG/MAG) and GTAW (TIG) welding processes.

Features

• Low hydrogen weld deposit, excellent low-temperature impact toughness
• Stable arc, low spatter, good slag release and smooth weld bead
• Suitable for carbon steel structures, works well under low-temperature service conditions
• Good resistance to cold cracking for medium and thick steel plates

Diameter & Packaging

MIG:0.8 / 1.0 / 1.2 / 1.6 mm 5KG Spool /15KG Spool
TIG:2.0 / 2.4 / 3.2 mm 5kg plastic tube

Welding Parameters

Polarity: DC+ (DCRP, Direct Current Reverse Polarity)

Shielding Gas

MIG/MAG: Ar + 5%~25% CO₂, Flow rate: 15–20 L/min
TIG: Pure Argon (99.99%)
Preheat & Interpass Temperature
80~120 ℃ for plate thickness ≥12 mm or low ambient temperature
Typical parameters (Φ1.2 mm MAG): Current 180~240 A; Voltage 24~28V
Deposited Metal Mechanical Properties
Tensile Strength: ≥485 MPa (70 ksi)
Yield Strength: ≥400 MPa
Elongation: ≥22 %
Charpy V-notch: ≥27 J @ -29℃

Applications

Storage tanks, ship hulls, machinery frames, pipeline engineering, offshore mild steel structures and carbon steel components requiring low-temperature impact performance.
Welding Precautions:
• Keep wire dry and avoid moisture absorption.
• Clean oil, rust and scale on groove before welding.
• Not applicable for high-temperature creep service conditions.
• Select proper preheat temperature for thick plates to avoid cold cracks

Continue browsing

More products from the catalog

Pair it with other pieces from the same collection or routine.

实心焊丝
General Welding Consumables

ER70S-6 Welding Wire – MIG Wire & TIG Filler Rod

ER70S-6 is a manganese-silicon deoxidized solid carbon steel filler metal classified under AWS A5.18. It is used for GMAW (MIG/MAG) and GTAW (TIG) welding of compatible carbon steel materials. GD WELD supplies MIG wire in 0.8–1.2 mm and TIG filler rods in 1.6–4.0 mm. Separate material certificates provide chemical analysis, deposited metal properties and -30°C impact test results.

View product
ER70S-3
General Welding Consumables

ER70S-3 Solid Welding Wire

ER70S-3 is a manganese-silicon deoxidized solid carbon steel welding wire classified under AWS A5.18. It is commonly used for general fabrication and welding of mild and low-alloy steels, offering stable weld-metal properties and good bead quality. The supplied material certificate reports 0.076% carbon, 0.94% manganese and 0.65% silicon. Deposited weld metal achieved 527 MPa tensile strength, 446 MPa yield strength and 25% elongation, with an average impact value of 111.7 J at -20°C.

View product
焊条 焊条 焊条
General Welding Consumables

WE600 Special Alloy Steel Welding Electrode

WE600 is a specialty alloy steel welding electrode associated with repair welding and dissimilar-metal applications. It is considered for selected difficult-to-weld steels and industrial components. Confirm the original product identity, technical data sheet (TDS), and compatibility with the base metal before use.

View product