When Should You Use ER70S-2 Welding Wire? Applications and Selection Guide
When should you use ER70S-2 welding wire? Find out which carbon steel applications suit it and how to select the right wire or TIG filler rod.

When Should You Use ER70S-2?
ER70S-2 is a solid carbon steel filler metal used for MIG/MAG (GMAW) and TIG (GTAW) welding.
It is worth considering when:
- Your welding procedure specifies ER70S-2.
- You need a filler metal compatible with the carbon steel being welded.
- The application requires the ER70S-2 deoxidizing system.
- You need a solid wire or TIG filler rod that meets the project's mechanical and chemical requirements.
The key point: Choose ER70S-2 based on the base material, welding process, and project specification—not simply because it is a general-purpose carbon steel wire.
1. Common Applications of ER70S-2
ER70S-2 is used in carbon steel fabrication and other applications where its classification and properties meet the welding requirements.
Application | What to Check |
|---|---|
Pipe and tubing | Welding process, joint preparation, and approved welding procedure |
Storage tanks | Base metal grade and required weld metal properties |
Machinery and equipment | Joint design, material thickness, and strength requirements |
Steel frames and structures | Project specifications and welding position |
General carbon steel fabrication | Filler metal compatibility and shielding gas |
For pipelines, offshore structures, shipbuilding, or low-temperature service, do not assume ER70S-2 is suitable based on the application name alone. Check the applicable code, welding procedure, and required test results.
2. What Makes ER70S-2 a Suitable Choice?
ER70S-2 contains manganese and silicon, along with small additions of titanium, zirconium, and aluminum.
These elements contribute to its deoxidizing system during welding. This is one reason ER70S-2 is considered for applications where its particular filler metal composition is specified.
However, deoxidizing elements do not eliminate the need for proper surface preparation. Remove oil, paint, moisture, heavy rust, and other contaminants as required by the welding procedure.
If you are comparing ER70S-2 with other solid carbon steel wires, see our guide to ER70S-2 vs ER70S-6 Welding Wire for a closer look at their composition and differences.
3. ER70S-2 MIG Wire vs TIG Filler Rod: Which Do You Need?
ER70S-2 can be supplied in different product forms. The correct form depends on your welding process.
Product Form | Welding Process | GD WELD Available Diameters |
|---|---|---|
Spool wire | MIG/MAG (GMAW) | 0.8, 1.0, 1.2, 1.6 mm |
Filler rod | TIG (GTAW) | 2.0, 2.4, 3.2 mm |
Choose MIG wire when using a wire feeder and a compatible GMAW procedure.
Choose TIG filler rod when adding filler metal manually during GTAW welding.
Before ordering, confirm the product form, diameter, shielding gas requirements, and applicable welding procedure.
4. When Should You Consider Another Welding Wire?
ER70S-2 is not the right choice for every carbon steel or alloy steel application.
Consider a different filler metal or request technical confirmation when:
- The project specification requires another AWS classification.
- The base material is a low-alloy or heat-resistant steel requiring a matching filler metal.
- The application involves high-temperature service or creep requirements.
- Required impact toughness or mechanical properties have not been verified.
- You are considering substituting ER70S-2 for another classification without approval.
For critical or code-controlled applications, any substitution should be reviewed against the applicable welding procedure and approved by the responsible welding engineer.
5. What Information Should You Provide When Ordering ER70S-2?
To help confirm the correct product, prepare these details:
Information | Example |
|---|---|
Welding process | MIG/MAG or TIG |
Base material | Carbon steel grade |
Product form | Spool wire or TIG filler rod |
Diameter | 1.0 mm, 1.2 mm, 2.4 mm, etc. |
Required quantity | Required order quantity |
Specification | AWS classification and any project-specific requirements |
If your project requires impact testing, special mechanical properties, or material certificates, include those requirements in your inquiry.
Need ER70S-2 Welding Wire?
GD WELD supplies ER70S-2 solid welding wire and TIG filler rods for industrial carbon steel welding applications.
Whether you need MIG wire for fabrication or TIG filler rods for pipe and other welding work, send us your required product form, diameter, quantity, and material specification.
Contact GD WELD to discuss your requirements and request a quotation.



