E383-16 Stainless Steel Electrode: Composition, Properties and Applications

Looking for E383-16 stainless steel electrodes? Check their chemical composition, mechanical properties, Alloy 28 applications and welding characteristics.

E383-17

What Is E383-16 Stainless Steel Electrode?

E383-16 is a high-alloy austenitic stainless steel covered electrode classified under AWS A5.4 for Shielded Metal Arc Welding (SMAW).
It is designed for welding high-alloy stainless steels where good corrosion resistance and compatible weld metal composition are required.
E383-16 deposited metal contains high levels of chromium and nickel, together with molybdenum and copper. This alloy combination makes it suitable for selected chemical processing and corrosion-resistant welding applications.
Typical applications include chemical equipment, acid-handling systems, storage tanks, pipelines and high-alloy stainless steel fabrication.

1. E383-16 Chemical Composition

Chemical composition is an important factor when selecting E383-16 welding electrodes, especially for applications involving corrosive environments.
The following table shows the specified chemical composition requirements and actual test results for the supplied E383-16 product.
Chemical Composition of Deposited Metal (%)
Element
Requirement
Actual Result
C
≤0.03
0.023
Mn
0.5–2.5
0.90
Si
≤0.90
0.72
S
≤0.020
0.010
P
≤0.020
0.016
Ni
30.0–33.0
31.3
Cr
26.5–29.0
28.3
Mo
3.2–4.2
3.86
Cu
0.6–1.5
1.18

2. E383-16 Mechanical Properties

In addition to chemical composition, mechanical properties are important when evaluating E383-16 stainless steel electrodes for industrial welding applications.
The supplied deposited metal test results are as follows:
Mechanical Properties of Deposited Metal
Property
Requirement
Actual Result
Tensile Strength
≥520 MPa
576 MPa
Elongation
≥28%
35%

3. E383-16 Applications and Compatible Materials

E383-16 is mainly associated with welding high-alloy austenitic stainless steels requiring corrosion-resistant weld metal.
Alloy 28 (UNS N08028)
Alloy 28 is an important material associated with E383-16. It is a high-alloy austenitic stainless steel containing chromium, nickel, molybdenum and copper.
The similar alloy system makes E383-16 a relevant electrode to consider for Alloy 28 welding, subject to the applicable material specification and qualified welding procedure.
Typical Industrial Applications
E383-16 may be considered for suitable applications involving:
  • Chemical processing equipment
  • Sulfuric acid handling systems
  • Phosphoric acid processing equipment
  • Corrosion-resistant storage tanks
  • Industrial chemical pipelines
  • High-alloy stainless steel fabrication
Can E383-16 Be Used for 904L or Alloy 825?
Not automatically. These materials have different chemical compositions and filler metal requirements.
E385-16 is more commonly associated with 904L stainless steel welding, while Alloy 825 generally requires a filler metal specifically matched to its nickel-based alloy system.
Always verify base metal compatibility, corrosion requirements and the recommended filler metal before welding.
Actual corrosion performance also depends on acid concentration, operating temperature, impurities and service conditions.

4. E383-16 Welding Characteristics and Selection

E383-16 is a covered electrode used for Shielded Metal Arc Welding (SMAW).
The -16 coating designation generally indicates suitability for AC or DC electrode positive (DCEP) operation.
When selecting and using E383-16 electrodes, consider the following:
  • Current and polarity: Follow the manufacturer's recommended AC or DCEP operating conditions.
  • Electrode diameter: Select according to material thickness, joint design and welding position.
  • Heat input: Follow recommended heat input and interpass temperature limits.
  • Electrode storage: Follow the manufacturer's storage and redrying instructions.
  • Welding procedure: Confirm the electrode selection against the applicable WPS and project requirements.
Before purchasing, buyers should confirm the base material grade, required electrode diameter, AWS classification and technical documentation requirements.
For industrial projects, request the product TDS and MTC to verify the electrode specifications and actual test results.

E383-16 Stainless Steel Welding Electrode Supplier – GD WELD

GD WELD supplies specialty stainless steel welding consumables for demanding industrial applications.
Our E383-16 stainless steel welding electrodes are intended for high-alloy and corrosion-resistant welding applications.
We support industrial buyers and distributors with product specifications, available electrode sizes and technical documentation according to supply requirements.
If you are looking for E383-16 welding electrodes, send us your required diameter, quantity, base material grade and application details.
Contact GD WELD for E383-16 product information and a quotation.


👉 Internal Link 1: Anchor text: E383-16 Stainless Steel Welding Electrode Link to: E383-16 Product Page (https://www.gdweld.com/products/e383-16)
👉 Internal Link 2: Anchor text: E385-16 Stainless Steel Welding Electrode Link to: E385-16 Product Page (https://www.gdweld.com/products/e385-16-904l-stainless-steel-welding-electrode)

Read next

More from the journal

Keep readers moving through related announcements, stories, and field notes.