
Can I Use ER80S-B2 Welding Wire for P22 Steel? B2 vs B3 Explained
Can ER80S-B2 be used for P22 steel? Compare ER80S-B2 and ER90S-B3 and learn when B2 can or cannot replace B3 for P22 welding.
Technical Blog
Practical guides for selecting welding consumables, understanding AWS classifications and solving material-specific welding challenges.

Can ER80S-B2 be used for P22 steel? Compare ER80S-B2 and ER90S-B3 and learn when B2 can or cannot replace B3 for P22 welding.

ER80S-B6 and ER80S-B8 are both Cr-Mo welding wires, but they are designed for different material systems. So what is the difference, and can one replace the other?

What welding wire is used for P91 steel? Should you use ER90S-B9 or ER90S-B91, and why are preheat and PWHT important?

What welding wire should you use for P11, P22, P5, P9 or P91 steel? Compare ER80S-B2, B3, B6, B8 and B9/B91 for Cr-Mo welding.

Why does high-strength steel crack after welding? What should you check before repairing the weld—crack location, timing, welding wire, preheat, or the WPS?

Why is my high-strength weld too hard after welding or PWHT? Is the problem the welding wire, HAZ, cooling rate, heat input, or heat treatment?

Can you use ER70S-6 carbon steel welding wire for Cr-Mo steel? What could go wrong, and when should ER80S-B2 or another Cr-Mo welding wire be used instead?

Low-alloy weld has porosity even when gas flow is normal? Find the likely causes in shielding, moisture, surface contamination, welding wire and parameters.

Why can a high-strength weld pass tensile testing but fail impact testing? Learn the common causes and how to improve weld impact toughness.

For Cr-Mo steel welding, PWHT is commonly used to reduce residual stress and obtain the required weld properties. But sometimes the weld hardness is still too high after PWHT.
Recommended products
Popular pieces selected to support the routines, repairs, and ideas featured in our journal.

ER420 is a high-carbon 13% chromium martensitic stainless steel solid welding wire and hardfacing filler metal classified under AWS A5.9. With higher carbon content than ER410, it delivers superior weld-metal hardness and abrasion resistance, making it ideal for welding matching 420 stainless steel and repairing or surfacing wear-resistant components.

ER309LMo (S309LMo) is a molybdenum-alloyed chromium-nickel stainless steel welding wire. Its higher molybdenum content distinguishes it from conventional ER309L and makes it suitable for applications where a Mo-containing filler metal is specified. GD WELD offers ER309LMo welding wire in 0.8, 1.0, 1.2, 1.6, 2.0, 2.4 and 3.2 mm diameters. The supplied 1.2 mm material certificate reports 23.18% chromium, 13.86% nickel, 2.12% molybdenum and 620 MPa deposited weld metal tensile strength.

ER410NiMo is a chromium-nickel-molybdenum stainless steel welding wire designation listed in AWS A5.9-2022. The supplied material certificate also identifies the product as H05Cr12Ni4Mo. GD WELD supplies this welding wire in a tested diameter of 1.2 mm. Its material certificate reports 12.27% chromium, 4.72% nickel, 0.49% molybdenum and a deposited weld metal tensile strength of 800 MPa.