

ER1050
ER1050 (Al99.5) is pure aluminum filler wire for welding 1xxx series pure aluminum materials.

ER1070
ER1070 (Al99.7) is ultra-high purity aluminum filler wire specially for welding 1xxx high-purity aluminum materials.

ER1100
ER1100 (Al99.0) is commercial pure aluminum filler wire for welding general 1xxx pure aluminum materials.

ER2329
ER2329 (AlCu6.3MnZr) is high-strength aluminum-copper filler wire for welding 2xxx aerospace aluminum alloys.

ER4046
ER4046 (AlSi10Mg) is an aluminum-silicon-magnesium filler wire for welding cast aluminum and 6xxx wrought aluminum alloys.

ER4047 Aluminum Welding Wire – MIG Wire & TIG Rods
ER4047 aluminum welding wire is an Al-Si filler metal containing 11–13% silicon under the AWS A5.10 classification. Its high silicon content provides good weld pool fluidity and a relatively low melting range. Available in MIG wire and TIG rod forms, ER4047 is considered for compatible aluminum casting repairs and selected aluminum joining applications. Confirm the base alloy and required weld properties before ordering

ER4643
ER4643 (AlSi4) is a low-silicon aluminum-silicon filler wire for welding heat-treatable 6xxx aluminum alloys.

ER5087
ER5087 (AlMg4.5MnZr) is an aluminum-magnesium filler metal containing approx. 4.8% magnesium with zirconium grain refiner.

ER5183 Aluminum Welding Wire – MIG Wire & TIG Rods
ER5183 is an aluminum-magnesium-manganese filler metal classified under AWS A5.10. With 4.3–5.2% magnesium, it is commonly selected for compatible high-magnesium aluminum alloys, including 5083 and 5086. Available in MIG wire and TIG filler rod forms, ER5183 is used in selected marine, transportation and low-temperature applications. Confirm the base alloy, service conditions and required properties before ordering.

ER5356 Aluminum Welding Wire (MIG & TIG)
ER5356 is an aluminum-magnesium welding filler metal containing 4.5–5.5% magnesium. Classified under AWS A5.10 and EN ISO 18273, it is commonly used for compatible 5xxx-series aluminum alloys and selected 6xxx-series applications. It is commonly selected for compatible 5052, 5083, and 5086 aluminum alloys, as well as selected 6xxx-series applications. Filler metal selection depends on the base alloy, service conditions, and applicable welding procedure.
Technical Blog
Welding Guides & Technical Resources
Practical guides for selecting welding consumables, understanding AWS classifications and solving material-specific welding challenges.
View all
E6011 Vertical Up vs. Vertical Down Welding: Which Should You Use?
Can E6011 be used for vertical up and vertical down welding? Compare welding directions, applications, and key factors for choosing the right technique.

Can You Use E6011 Welding Rods with AC or DC?
Can E6011 welding rods run on AC or DC? Learn the correct polarity, compare AC and DC+ welding, and check your electrode specifications before welding.

When Should You Use ER70S-2 Welding Wire? Applications and Selection Guide
When should you use ER70S-2 welding wire? Find out which carbon steel applications suit it and how to select the right wire or TIG filler rod.
About GD WELD
Specialty Welding Consumables
Looking for a specific or hard-to-source welding grade? Send us your AWS classification, base material, diameter and application. We will help you identify a suitable product and supply solution.
GD WELD is a China-based specialty welding consumables supplier, focused on sourcing and supplying welding wires and electrodes for demanding industrial applications. Specialty Grades · Reliable Sourcing · Technical Matching · Global Supply

Contact
Specialty Welding Consumables
Need a hard-to-source welding consumables? Please contact GD WELD.
Inquiry
Send the Inquiry
If you are looking for a specific or hard-to-source welding grade...


