

E71T-1C/9C
E71T-1C/9C are rutile all-position CO₂ gas-shielded flux-cored wires featuring stable arc, low spatter and easy slag removal, delivering smooth weld appearan...

E71T-9C/9M
E71T-9C/-9M is a gas shielding flux-cored wire for 490MPa high strength steel, can use both CO2 and 75-80%Ar+20-25% CO2 shielding gas.

E71T-9C-J
E71T-9C-J is a cost-effective quality rutile flux cored wire designed for allpositions welding with 100% CO2 shielding for excellent CVN impact performance a...

E71T-9C
E71T-9C is a rutile all-position gas-shielded flux-cored wire with stable arc and low spatter. Optimized for low-temperature impact toughness, it suits criti...

E71T-9M
E71T-9M is a gas-shielded, flux-cored welding wire used for all-position carbon steel fabrication, featuring strict toughness requirements and mixed shieldin...

ER410NiMo / H05Cr12Ni4Mo Stainless Steel Welding Wire
ER410NiMo is a chromium-nickel-molybdenum stainless steel welding wire designation listed in AWS A5.9-2022. The supplied material certificate also identifies the product as H05Cr12Ni4Mo. GD WELD supplies this welding wire in a tested diameter of 1.2 mm. Its material certificate reports 12.27% chromium, 4.72% nickel, 0.49% molybdenum and a deposited weld metal tensile strength of 800 MPa.

ERNi-CI
ERNi-CI is an AWS A5.15 pure nickel solid wire with nickel content ≥98% for cast iron welding. It delivers outstanding toughness and effectively inhibits car...

ERNiCrFe-5
ERNiCrFe-5 (SNi6062) is a Ni-Cr-Fe-Nb nickel-based solid wire with superior oxidation & chloride stress corrosion resistance and low hot cracking tendency. F...

ERNiCrMo-3 Nickel Alloy Welding Wire (Alloy 625)
ERNiCrMo-3 is a nickel-chromium-molybdenum-niobium welding filler metal classified under AWS A5.14 and associated with Alloy 625 (UNS N06625). Its combination of chromium, molybdenum and niobium provides a balance of strength and corrosion resistance for demanding industrial welding applications. This ERNiCrMo-3 nickel alloy welding wire is supplied in a tested diameter of 1.6 mm. The material test certificate reports 64.80% nickel, 21.14% chromium, 9.02% molybdenum and 3.77% niobium plus tanta

ERNiFe-CI
ERNiFe-CI (Nickel 55) is wire and electrode filler metal with roughly 55% nickel and 45% iron. It is widely applied to welding and repair of grey cast iron,...
Technical Blog
Welding Guides & Technical Resources
Practical guides for selecting welding consumables, understanding AWS classifications and solving material-specific welding challenges.
View all
E6011 Vertical Up vs. Vertical Down Welding: Which Should You Use?
Can E6011 be used for vertical up and vertical down welding? Compare welding directions, applications, and key factors for choosing the right technique.

Can You Use E6011 Welding Rods with AC or DC?
Can E6011 welding rods run on AC or DC? Learn the correct polarity, compare AC and DC+ welding, and check your electrode specifications before welding.

When Should You Use ER70S-2 Welding Wire? Applications and Selection Guide
When should you use ER70S-2 welding wire? Find out which carbon steel applications suit it and how to select the right wire or TIG filler rod.
About GD WELD
Specialty Welding Consumables
Looking for a specific or hard-to-source welding grade? Send us your AWS classification, base material, diameter and application. We will help you identify a suitable product and supply solution.
GD WELD is a China-based specialty welding consumables supplier, focused on sourcing and supplying welding wires and electrodes for demanding industrial applications. Specialty Grades · Reliable Sourcing · Technical Matching · Global Supply

Contact
Specialty Welding Consumables
Need a hard-to-source welding consumables? Please contact GD WELD.
Inquiry
Send the Inquiry
If you are looking for a specific or hard-to-source welding grade...


