
ERCuSi-A
ERCuSi-A is silicon bronze wire for MIG/TIG welding of copper, brass, silicon bronze and galvanized steel. With ~3% Si and trace Mn, Sn, it offers good corro...
Collection
There is always a suitable product for you with a wide variety of product types

ERCuSi-A is silicon bronze wire for MIG/TIG welding of copper, brass, silicon bronze and galvanized steel. With ~3% Si and trace Mn, Sn, it offers good corro...

ERCu is deoxidized pure copper wire. It is used for copper matching welding, casting repair, copper-carbon steel joints and anti-corrosion surfacing, applied...

ER5556 (AlMg5.2Mn) is high-magnesium aluminum-manganese filler wire for welding 5xxx aluminum-magnesium alloys.

ER5554 is an aluminum filler metal that contains more manganese and zinc with slightly more magnesium than ER5356.

ER5087 (AlMg4.5MnZr) is an aluminum-magnesium filler metal containing approx. 4.8% magnesium with zirconium grain refiner.

ER4643 (AlSi4) is a low-silicon aluminum-silicon filler wire for welding heat-treatable 6xxx aluminum alloys.

ER4046 (AlSi10Mg) is an aluminum-silicon-magnesium filler wire for welding cast aluminum and 6xxx wrought aluminum alloys.

ER2329 (AlCu6.3MnZr) is high-strength aluminum-copper filler wire for welding 2xxx aerospace aluminum alloys.

ER1100 (Al99.0) is commercial pure aluminum filler wire for welding general 1xxx pure aluminum materials.

ER1070 (Al99.7) is ultra-high purity aluminum filler wire specially for welding 1xxx high-purity aluminum materials.

ER1050 (Al99.5) is pure aluminum filler wire for welding 1xxx series pure aluminum materials.

ERNiFe-CI (Nickel 55) is wire and electrode filler metal with roughly 55% nickel and 45% iron. It is widely applied to welding and repair of grey cast iron,...

E71T-9M is a gas-shielded, flux-cored welding wire used for all-position carbon steel fabrication, featuring strict toughness requirements and mixed shieldin...

E71T-9C is a rutile all-position gas-shielded flux-cored wire with stable arc and low spatter. Optimized for low-temperature impact toughness, it suits criti...

E71T-9C-J is a cost-effective quality rutile flux cored wire designed for allpositions welding with 100% CO2 shielding for excellent CVN impact performance a...
Recommended articles
Buying guides, material notes, and stories for choosing with more confidence.

Can E6011 be used for vertical up and vertical down welding? Compare welding directions, applications, and key factors for choosing the right technique.

Can E6011 welding rods run on AC or DC? Learn the correct polarity, compare AC and DC+ welding, and check your electrode specifications before welding.

When should you use ER70S-2 welding wire? Find out which carbon steel applications suit it and how to select the right wire or TIG filler rod.